Inor IPAQ-LPLUS GB Manuale Utente Scaricare il pdf

The transmitter is congured from a standard IBM compatible PC

by using the IPRO software (version 4.14 or later). IPRO 4.14 is com-

patible with Windows 98SE, Windows NT Workstation 4.0, Windows

2000 and Windows XP. When the transmitter is recongurated by a

PC no recalibration is needed.

Connect the IPRO communication cable between the serial port of

a PC (with IPRO software installed) and the PC connection port on

IPAQ-L

PLUS

The IPAQ-L

PLUS

transmitter do not have to be externally powered

when you congure with the IPRO+ communication cable. If you use

the IPRO-X communication cable you need to power the transmitter.

If IPRO is not installed in your PC, install the software following the

instructions in the setup program.

Conguration from PC is “on-line”, that is, the transmitter can be

installed in the process with the input connected during congura-

tion. The output is frozen while transmission from PC to IPAQ takes

place. When the transfer is done, the transmitter uses the new

parameters.

INTROD UCT ION

IPAQ-L

PLUS

is a loop-powered intelligent precision railmounted

temperature transmitter. The size and versatillity makes it an ideal

choice for all industrial instrumentation. The transmitter gives you the

possibility to use a customized linearization using 40 points, or 8 third

degree polynimials to give you the best possible precision.

IPAQ-L

PLUS

also have SmartSense, an intelligent

way to monitor the isolation resistance.

DIM ENS ION S

Intelligent Precision

Temperature

Transmitter

CONFIG URA TIO N

Since IPAQ-L

PLUS

is a precision instrument it´s recommended check-

ing the calibration once a year. Use equipment with an

inaccuracy of at least 5 times better than the checked one, e.g. if you

are checking a transmitter with an inaccuracy of 0.05% use instrument

with an inaccuracy of maximum 0.01%.

You can either perform a full recalibration of the transmitters stored

calibration parameters (Basic Calibration) or make a System

Error Correction (recommended). In each case use the IPRO software

and follow the instructions on the screen. When performing a System

Error Correction, please note that this is only a compensation for er-

rors at the measuring range in use.

CAL IBR ATI ON

86BIQ00013 2010-11

PC connection

ME AS URE O F SUC CE SS

USER INSTRUCTIONS

The user instruction must be read prior to adjustment and/or installation.

All information subject to change without notice.

ME AS URE O F SUC CE SS

This product should not be mixed with other kind of scrap, after usage.

It should be handled as an electronic/electric device.

www.inor.com, www.inor.se

INOR Process AB, PO Box 9125, SE-200 39 Malmö, Sweden,

Phone: +46-40-31 25 60, Fax: +46-40-31 25 70, E-mail: support@inor.se

INOR Transmitter OY, Unikkotie 13, FI-01300 Vantaa, Finland,

Phone:+358-10-421 7900, Fax: +358-10-421 7901, E-mail: support.@inor.se

INOR Transmitter GmbH, Am Bocksborn 5,

D-63571 Gelnhausen, Germany,

Phone: +49-6051 14807, Fax: +49-6051 14806, E-mail: support.de@inor.se

KROHNE Temperature Division INOR, 7 Dearborn Road,

Peabody, MA 01960, USA,

Phone: +1-978-826 6900, Fax: +1-978-535 3882, E-mail: inor-inf[email protected]

1 2

Sommario

Pagina 1 - Transmitter

The transmitter is congured from a standard IBM compatible PC by using the IPRO software (version 4.14 or later). IPRO 4.14 is com-patible with Wi

Pagina 2 - Input connections

LIM ITE D W ARR ANT YINOR Process AB, or any other afliated company within the Inor Group (hereinafter jointly referred to as ”Inor”), hereby warrant

Commenti su questo manuale

Nessun commento

Inor IPAQ-LPLUS GB Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Inor IPAQ-LPLUS GB. INOR IPAQ-LPLUS GB User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Inor IPAQ-LPLUS GB